HOT SALE FOR R900052621 M-3SED6UK13/350CG24N9K4 M-3SED6UK1X/350CG24N9K4

• Direct operated directional seat valve with solenoid actuation
• Porting pattern according to DIN 24340 form A (without loSAARing hole)
• Porting pattern according to ISO 4401-03-02-0-05 (with loSAARing hole)
• Safe switching also with longer standstill periods under pressure
• Wet-pin DC solenoids with detachable coil (AC voltage possible by means of a rectifier)
• Solenoid coil is rotatable by 90°
• The coil can be changed without having to open the pressure-tight chamber
• Electrical connection as individual connection
• With concealed manual override, optional
• Inductive position switch (contactless)

Type code

01	Mineral oil					M
02	2 main ports					2
	3 main ports					3
	4 main ports					4
03	Seat valve					SED
04	Size 6					6
05	Main ports		2	3	4
	Symbols		●	–	–	PK
			●	–	–	NK
			–	●	–	UK
			–	●	–	CK
			–	–	●	D
			–	–	●	Y
	● = available
06	Component series 10 ... 19 (10 ... 19: unchanged installation and connection dimensions)					1X
07	Operating pressure up to 350 bar					350 bar
08	Solenoid, wet-pin, with detachable coil					C
09	Direct voltage 24 V					G24
	Nominal voltage 205 V at DC solenoid with operation with AC voltage mains (AC voltage mains 230 V – 50/60 Hz with an admissible voltage tolerance of +/- 10 %)					G2051)
	Nominal voltage 96 V at DC solenoid with operation with AC voltage mains (AC voltage mains 110 V/120 V - 50/60 Hz with an admissible voltage tolerance of +/- 10 %)					G96
	Further ordering codes for other voltages are provided in the technical data
10	With concealed manual override					N9
	Without manual override					no code
Electrical connection
11	Individual connection
	without mating connector, individual connection with connector according to DIN EN 175301-803					K4 2)
	With M12x1 plug-in connection, high-performance version 5-pole, integrated interference protection circuit, operating display with LED					K72L3)
Spool position monitoring
12	Without position switch					no code
	Monitored spool position "a"					QMAG24
	Monitored spool position "b"					QMBG24
13	Without check valve insert, without throttle insert					no code
	With check valve insert					P
	Throttle Ø 1.2 mm					B12
	Throttle Ø 1.5 mm					B15
	Throttle Ø 1.8 mm					B18
	Throttle Ø 2.0 mm					B20
	Throttle Ø 2.2 mm					B22
14	NBR seals					no code
	FKM seals (other seals upon request)					V
	Observe compatibility of seals with hydraulic fluid used.
15	Without loSAARing hole					no code
	With loSAARing hole and locking pin ISO 8752-3x8-St					/62
16	Further details in the plain text					*